| Vector In Home Hair Removal System
Professional Electrolysis Hair Removal System

Vector - The Permanent Hair Removal System: The ultimate tool for removing unwanted hair anywhere on the body. This safe, non-invasive, and highly effective permanent hair removal system is excellent for bikini line hair removal, facial hair, underarm hair, leg hair, belly button hair, lip hair, eyebrow hair removal as well as back hair and much more! Use this once medically exclusive and expensive device at home for a fraction of what others charges. This laser in used in the privacy of your own home. In home permanent hair removal electrolysis! The Vector Hair Removal System is the only epilator on the consumer market that permanently removes unwanted hair and is FDA APPROVED! It is a professional electrolysis machine with foot switch operation that can be used at home or in the salon. A complete in-home permanent hair removal system with electrode patches, high conductivity gel, precision galvanic tweezers, foot pedal, and the Vector epilator machine to begin immediate treatments.
Permanent Hair Removal is Absolutely Amazing!
At spas you will over $60 to $300 for just one permanent hair removal treatment. Now you have the ultimate VECTOR HAIR REMOVAL UNIT in your home for only $184.95 for as many treatments as you like.
Product Description The Vector™ Electrolysis System is the most advanced personal hair removal system available. It permanently removes unwanted hair. For the first time ever, it is now possible to perform professional electrolysis treatments in the privacy of your own home. Unlike other devices that use radio frequencies and batteries, the Vector™ uses the process of electrolysis to dissolve the hair follicle with AC power. The Vector™ Hair Removal System is so advanced that it achieves professional results without the use of a needle. Tweezers are used to make the procedure safer and less painful. Clinical studies have shown that the Vector™ system has equivalent effectiveness as professional needle electrolysis. The Vector™ replaces salon visits and you will no longer have to pay $80/hr for electrolysis sessions.
INCLUDED ARE: The Vector™ Electrolysis System comes with the Vector electrolysis machine, patch electrodes, conductivity gel, and galvanic tweezers all for the unbelievably low price of just $184.95!
About The Vector Machine Our amazing Vector™ machine is only 3” wide, 1 ½” high, 5” deep and produces same results as professional electrolysis machines that cost thousands of dollars! Now you can perform real electrolysis in your own home and not have to submit yourself to torture with a needle! The Vector machine also offers other advantages over conventional electrolysis. During conventional electrolysis the patient has to hold a metal rod smeared with gel. With the Vector machine you only apply a resting electrode patch anywhe
re on the body and continue with the treatment. It is incredibly easy to operate the Vector™. There is no reason to shave anymore. Here is what you get:
· -The Vector™ machine. · -8 Resting electrode patches. · -2 oz. Supply of high viscosity no-needle conductive gel. · -Alligator clip patch cord. · -Galvanic Tweezers. · -120V AC power cord.
This amazing machine will save you hundreds of dollars on electrolysis treatments, razors, depilatories, and waxes!
"THIS IS THE ONLY SYSTEM THAT I HAVE USED THAT BROUGHT RESULTS THE FIRST TIME THAT I USED IT!"
"I SAW RESULTS QUICKLY WITH THIS SYSTEM AND USED ON MY FACE AND BIKINI LINE WITHOUT ANY PAIN - THE HAIR THAT WAS VECTORED NEVER GREW BACK."
"I HAVE SAVED $1,000's OVER WHAT MY SALON QUOTED ME FOR ELECTROLYSIS AND THE RESULTS CAME VERY QUICKLY!"
How it Works Electrolysis is a process in which a needle is inserted into the hair shaft and then an electrical current is passed through the hair follicle. Although hair itself is dry, below the surface of the skin it is immersed in a watery environment with a high mineral content. The electrical current from the needle causes a chemical reaction and turns the water and salt in the hair follicle into sodium hydroxide (NaOH), which is an extremely corrosive alkali. If you were to put just a drop of pure sodium hydroxide on your skin, it would instantly burn a hole right through. This sodium hydroxide dissolves the hair follicle and the papilla causing a complete and permanent destruction of hair growth.
Even though this is a highly effective procedure, it is also has many drawbacks. First of all, the insertion of a needle into the skin over and over again can be quite painful. Treatment with a needle also requires a high degree of skill, the technician must guide the needle very accurately to reach the bottom of the hair follicle. Penetrating the skin with a needle also increases chances of infection.
As it turns out, it is completely unnecessary to insert a needle to produce sodium hydroxide in the hair follicle. The Vector™ machine works by simply grasping the hair with tweezers and applying a highly conductive gel with silver chloride. Without the electrically conductive gel this process would not work, as hair cannot conduct electricity. Applying silver chloride gel to the hair above the skin allows electrical current to pass over the non-conductive portion down into the hair follicle. The Vector™ machine gives you incredible ease of operation and with the same results as regular needle electrolysis! Everyone knows how to use tweezers and you will be able to start using the Vector machine in just minutes!
Truth About Hair Removal Have you tried using all kinds of different gadgets, razors, waxes, depilatories, and magic lotions and still have unwanted hair? The truth is, none of these methods work and will only leave you disappointed, as well as waste your time. Here is another fact: The only known method of permanent hair removal is electrolysis. But anyone who has undergone electrolysis treatments will tell you that it can be quite intimidating to have a needle inserted into each hair follicle over and over again. Perhaps most intimidating of all is the cost; electrolysis treatments are on average $60-$100/hour and require at least one session a week for a period of several months to over a year. An alternative is to undergo laser hair removal, it will take less time to treat large areas but it will cost more then electrolysis per session and the results are not even permanent. You will have to continue with the treatments periodically to maintain the results. Consumers have spent millions of dollars on products that have no effect. There is no magic lotion or device that will get rid of unwanted hair overnight. If you have been fooled into purchasing those products by false advertising you may be reluctant to believe our claims as well. Rest assured that you will have real results and PERMANENT hair removal. The Vector™ is your professional electrolysis in a small box.
Vector vs. Radio Frequency Devices Have you been sorely disappointed by that useless gadget you bought from a department store or a television infomercial? Was it not any different that simply tweezing your hair? Yes, it was a complete waste of time and money.
Radio frequency devices work on the concept that radio frequency (RF) energy gets transmitted by the electronic tweezers down the hair shaft. RF energy is similar to the energy produced in a microwave which causes a heating effect. The heat will dehydrate and coagulate the hair bulb and the papilla. Unfortunately, hair cannot conduct current and therefore radio frequency (an alternating current) will not move or flow down the hair shaft. There will be no dehydration or coagulation of the hair shaft.
There is some heating of the actual hair that is in contact with the tweezers due to friction heat caused by spinning water molecules. Heat can potentially travel down the hair shaft but none of it will actually reach the hair follicle. This is due to the fact that these devices have an FDA assigned frequency of 27.12MHz and a power output of 1.5 Watts. This wattage is so low that it takes 60 seconds of RF energy to increase the temperature of the hair follicle by 2°F. Now consider the following; it takes at least 108°F to cause any kind of damage to the hair follicle. With the normal body temperature of 98°F, you will have to hold each hair for at least 5-6 minutes, one by one, to see any kind of result whatsoever. No one would ever make that kind of a time investment.
While lasers are now a very effective method of hair removal, this method is not permanent and the treatment is very expensive. Here is some additional information you might want to know about lasers.
· Lasers only work on people with very light skin. · Lasers do not work on people with gray, red, or light hair. · Lasers can’t be used on sensitive skin. · Laser treatment is very painful. · Lasers can’t be used on areas with moles, freckles, or scars.
|
IMPORTANT INFORMATION ABOUT THE VECTOR SYSTEM:
- The Vector System works the same way as professional electrolysis machine and therefore hair is removed one at a time. It is not possible to permanently remove a patch of hair. The treatment process requires patience and determination.
- The treatment can be somewhat painful and can exceed the comfort level of some individuals.
- A certain level of skill is required to achieve the best results. It takes some practice to gain proficiency in the procedure.
- You must be realistic about your expectations, the Vector System removes one hair at a time and therefore it can take a long time to permanently remove hair from large areas.
- It is easier to remove coarse, thick hair then very light “peach fuzz” hair. A greater degree of skill is required to permanently remove thin and light hair.
-
Any time you have questions or need assistance with operating the Vector System you can contact the Vector Electrolysis 24 hour support line at 888-736-7417 and a trained professional will walk you through the procedure so you can get the best possible results from your treatment.
|
|